845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Cabinet Hardware
1 size only: 1-9/32" x 1-25/32". Packed in visual pack with 1/2" x 4" oval head screws. Satin brass finish.
National catalog model No. 1440 drive-in ball catch. For use in wood, metal closet or cabinet doors. Adjustable tension. Includes fasteners for quick and easy installation. Steel material.
1-unit construction. No separate parts, preassembled so there is no contact under load except through the rolling balls. Center opening allows for center post and ease of centering the unit. Attaches easily to second surface even though hidden after it is fastened to first surface. Only 5/16" thick adds a minimum of height to item. (Can be recessed into surfaces, reducing space to 1/8".) Triangle's large ball race designed for maximum stability. Bearing is interlocked. No rivet to work loose or bind.
1-unit construction. No separate parts, preassembled so there is no contact under load except through the rolling balls. Center opening allows for center post and ease of centering the unit. Attaches easily to second surface even though hidden after it is fastened to first surface. Only 5/16" thick adds a minimum of height to item. (Can be recessed into surfaces, reducing space to 1/8".) Triangle's large ball race designed for maximum stability. Bearing is interlocked. No rivet to work loose or bind.
1-unit construction. No separate parts, preassembled so there is no contact under load except through the rolling balls. Center opening allows for center post and ease of centering the unit. Attaches easily to second surface even though hidden after it is fastened to first surface. Only 5/16" thick adds a minimum of height to item. (Can be recessed into surfaces, reducing space to 1/8".) Triangle's large ball race designed for maximum stability. Bearing is interlocked. No rivet to work loose or bind.
Plastic case. 1-15/16" L. x 11/16" W. Strike: 1-1/8" L. x 7/8" W. x 3/4" H. Tan plastic (PT) finish.
Drive-in bullet Ball Catch premium finish, adjustable ball, for wood and metal closet or cabinet doors. 3/4" size, 7/8"diameter, 1-3/16" length, 1" face with lip, 1-3/8" x 2-1/8" strike plate.
Aluminum case dual action. 2" L. x 1" W. x 5/8" H. Strike: 1-1/8" L. x 3/4" W. Aluminum (AL) finish.
Manufactured of steel with satin brass finish. The Soss invisible hinge is for the consumer who wants security and quality. Fully concealed hinge. Use where a full 180 deg. opening and smooth flush finish. 2 hinges per card. See dimensions.
Design allows magnet to pivot so that it will always center squarely on the metal strike for maximum holding strength. Offers sturdy, permanent magnet in a nylon case. Slotted screw holes are for ease of adjustment.
Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. Manufactured from steel.
Used on french doors, single doors and cabinets. Adjustable ball for door gap and latching tension. Replaces existing door bolt and strike. Screw holes are countersunk for flush mount. Replaces existing door bolt and strike. Manufactured from steel.